The diagram shows a process of making a storage area from a material called concrete canvas Summarize the information by selecting and reporting the main features, and make comparisons where relevant.
The figure illustrates how a storage area is made from a material called concrete canvas.
To summarise, it can be seen that the process contains seven different stages
such
as manufacturing, unwrapping, watering and storing. It Is not an automatic process and involves employers.
To begin
with, in the manufacturing phase, the material presents a fibrous top surface which is dried and covered with waterproof material. Next,
the concrete is delivered and unwrapped. At this
point, the fourth phase starts and the concrete is spread on the ground with the help of some pegs and a rope connected to a vehicle. Later, the air is pumped with a special machine and a worker has to wet the ground with a lot of water. After, we have to wait between 20 and 24 hours to complete the setting of the concrete canvas. Finally
, the product is ready and the items are stored.Submitted by robertasottile.rbst on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Conclusion: The conclusion is too long.
Introduction: The chart intro is missing.
▼
Introduction: The chart intro is missing.
▼
Vocabulary: Only 4 basic words for charts were used.
▼